Heynau Getriebe + Service GmbH
H-Drive (traction drives)
Driving power
- Driving power up to 4 kW
- Output torques up to 1000 Nm
- Output speeds of 0,027 r.p.m. up to 5600 r.p.m.
- Regulating range up to R = 9
- Also available in design conforming to the Directive ATEX
Options
- Precision variable speed gearbox
- Extruder variable speed gearbox
- SKB-Shift unit
Minidrive (traction gears)
Driving power
- Driving power 0.18 kW
- Output torques up to 150 Nm
- Output speeds of 0,003 r.p.m. up to 3900 r.p.m.
- Regulating range up to R = 9
- Also available in design conforming to the Directive ATEX
Options
- Extruder gearbox
- Gearboxes with very slow revolutuions per minute
D.c. geared motors
- Combinations with spur gearboxes, planetary gearboxes and worm gearboxes
- High power transmission with smallest construction
- Alternatively in construction being poor in backlash
- Life-lubricated, maintenance-free
D.c. Disc-rotor geared motors
- Driving power 0,09 KW - 7,2 KW
- Output torques up to 1200 Nm
- Transmission ratio 2,956 - 1006:1
- Power converter for 1-Q and 4-Q drive up to R = 5000
- various gear attachments are possible
D.c. Small-size geared motors
- Driving power 150 W
- Output torques up to 30 Nm
- Transmission ratio 3:1 - 5610:1
- Power converter for up to R = 50
- More than 30 ratios of i = 3,33 up to 2805
- High efficiency
- Service life greater than 20.000 hours
- Position-independent
- Lifetime oil filling
- A.c. / d.c. motor, built-on directly
- Low-noise running
- High-quality case hardened gear teeth parts
- Gearboxes in cast iron to a high degree free of abnormal distortion and poor in vibration
- Designs with foot and B14
- Nominal output torque Tab = 10 Nm
Compact geared motors
- High power transmission with smallest construction
- Alternatively in construction being poor in backlash
- Life-lubricated, maintenance-free
Geared motor GC
- Acceptable for mounting standard motors
- Construction being poor in backlash is possible
- H-drive, compatible
- Smooth running helical gearings
- Also available in design conforming to the Directive ATEX
Special gears
Whenever very special requirements on the constructive design and on the geometric design of a drive are making clear the limits of standard gearboxes according to catalogue, the standard use of application-oriented SPECIAL DRIVES adapted to the construction of machine is the most economical and technically optimum solution.
If you are looking then for special drive solutions, the enterprise Heynau Getriebe + Service GmbH offers you decades of extensive experiences in the professional construction of gearboxes competent technical consultation by part of our drive specialists for application-oriented solutions "true to size" In close technical cooperation with the orderer, we:
- develop
- construct
- produce
DRIVES UPON CUSTOMER'S REQUEST corresponding completely to your problem definition.
As start, a sketch, a draft or also your construction drawing are enough for us for designing for you the individual gearbox versions.
Your partner for the special drive solutions
