Contact us by email Contact us by email Contact us by email
TSCHAN

TSCHAN COUPLINGS

TSCHAN®-S

 

 

 Rating

 

 Torque [Nm]

0.6 - 40000

 Speed [1/min]

1500 - 19000

 Geometry / dimensions

 

 External diameter up to  [mm]

400

 Bores up to [mm]

400

 Transmission element

 

 Type 

Pressurised spacers

 Material

Elastomer: VKR, VK60D, VKB, Pb70, Pb82

 Note

 


 

Clutch hub and guide ring made of forged steel, machined on all sides.

 

Elastomers with various settings, for use from -30°C to +120°C ambient temperature.

isometric projection

 Types 
 (dimension sheet) 

Sizes available

  

 

S - St
Standard

50
to
400


S - LSt
long hubs

50,85
to
400


S - (L)-St
Standard/long hubs

50,85
to
400


S - BT
with brake drum

100
to
400


SD - 5
Standard-combination

100
to
400


SDD - 5
Standard

100
to
400


SDDL - 5
long hubs

100
to
400


SDDL - 5 - BS
with brake disc

145
to
400


SDDL - 5 - BSV
with internally ventilated brake disc

125
to
400


SX
outer hub

100
to
400


SV
inner hub

100
to
400

TSCHAN®-B

 

 

 Rating

 

 Torque [Nm]

2500 - 550000

 Speed [1/min]

1800 - 7600

 Geometry/dimensions

 

 External diameters up to [mm]

900

 Bores up to [mm]

400

 Transmission element

 

 Type 

Pressurised buffers

 Material

Elastomer: VKR, Pb82

 Note

 


 

The elastic claw coupling, machined on all sides, for high torque levels and high revolutions.

 

Buffers can be easily changed when installed, using radial extension.

isometric projection

 Types 
 (dimension sheet) 

Sizes available

  

 

BHDD
Standard

50
to
400


BHDD
with reinforced hubs

50,85
to
260


BHDDV
with a concealed hub

100
to
400


BHDDV - BS
with a concealed hub and a brake disc

100
to
400


BHDDVV
with two concealed hubs

100
to
400


NOR-MEX®

 

 

 Rating

 

 Torque [Nm]

13 - 97500

 Speed [1/min]

1200 - 12500

 Geometry/dimensions

 

 External diameters
 up to  [mm]

575

 Bores up to [mm]

260

 Transmission element

 

 Type 

Pressurised spacers

 Material

Elastomer: VPR, Pb72, Pb82

 Note

 

 


 

As three-piece version, hub with separate steel guide ring.Clutch hub and guide ring made of forged steel, machined on all sides.

  

Elastomers with various settings, for use from -40°C to +120°C ambient temperature.

isometric projection

 Types 
 (dimension sheet) 

Sizes available

  

 

E
Standard claw coupling

50
to
575


G
Claw coupling with sliding claw ring

82
to
575


ETW
Combination with brake disc

112
to
415


GTW
Combination with brake disc and sliding claw ring

112
to
415


EBT
Combination with brake drum

112
to
415


GBT
Combination with brake drum and sliding claw ring

112
to
415


H
Coupling with removable transition pieces for pumps

67
to
415


LE
Flange coupling

(externally centred)

67
to
575


LG
Flange coupling (externally centred) with sliding claw ring

82
to
575


ME
SAE-Flange coupling

97
to
415

 


MG
SAE Flange coupling with sliding claw

97
to
415


MV
SAE-Flange coupling with reversed hub

(short construction))

97
to
415


KE
Flange coupling

168
to
265


KG
Flange coupling with sliding claw ring

168
to
265


ROLLASTIC®
 
   
Rating    
Torque [Nm] 40 - 8000
Speed [min-1] 9100 - 1400
Geometry/dimensions    
External diameters up to [mm] 300
Bores up to [mm] 105
Transmission element    
Type Roller bearing pressurised buffer along the length of the shaft
Material   Elastomer: VK
Note    
    No contact between metallic parts in the event of an unforeseen failure of the elastic buffer. Replacement of the elastic buffer when installed, without adjustment.
    Coupling can be used from -20°C to +80°C ambient temperature.